| Home |
| Search |
| Today's Posts |
|
#25
July 27th 05, 04:14 AM
|
|||
|
|||
John;
No more comments from me. Dave WD9BDZ John Smith wrote: label the frequency determining elements? Why the xtal and any associated coil or cap used to "pull" the freq in the cmos oscillator... or the pin you take the signal out of on of the decade/hex/octal freq divider... errr, oh wait, you are speaking of the ancient stuff from museums! That is simple, the crystal (if present) and/or coil and cap... hey, you didn't sneak a freq doubler in behind that osc, did ya? geesh... any cber would know that, well, after he read it... and you ain't sneaky and tryin' to run off a harmonic of that osc, are ya? ROFLOL!!!! John "Fred W4JLE" wrote in message ... and label the frequency determining elements. At least that is how I remember it... "David G. Nagel" wrote in message ... Draw a Colpitts Oscillator Dave WD9BDZ |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Question pools and answers... | Policy | |||
| FCC Morse testing at 16 and 20 WPM | Policy | |||
| New Candidate for 'Youngest Extra' | Policy | |||
| New ARRL Proposal | Policy | |||
| Low reenlistment rate | Policy | |||
Threaded Mode
